| MG CUT 1, MG CUT 2 semi automatic cutting table is used for cutting 3-12 mm thick glass sheets at a maxi-mum size of 3210x 2500 mm. The glass is placed on the working surface by tiltingthe table. The lifting cylindersare equipped with safety valves. In case of failure duringthe lift, the table does not fall back. After the tilting the glass fixing nails automaticallysink below the level of the table. The basis bumpers( O points) of the cutting can be raised from the plain of the table. Pressing the foot pedal the air-blowing is activatedand the glass can be moved
easily. The cutting dimensions are adjusted with a measuring tape. |
|
One can make the lengthwise cutting manually and the cross
cutting with the electric engine. The cutting heads are operated by pneumatic
cylinders. The pressure of the head is centrally controlled based on the thickness of the
glass. The cutting wheels are oiled centrally. The breaking of the glass is done with the help a length and a cross breaking bar. The operation of the
machine does not require excessive technical knowledge, its handling is simple and well
arranged. We recommend the MG CUT 1, MG CUT 2 semi automatic cutting
table to, who wish to manufacture 100-450 m2 insulated glass structures a
day. |
MG CUT 1 Semi Automatic Cutting Table:
Main Features:
Electricity: 400V 50Hz
Maximum glass size: 3210x2500mm
Glass thickness: 3-12mm
Cutting precision: ±0,5mm
Tilting with pneumatic work cylinder
Tilted cylinders equipped with safety valve
Built in air cushion for moving the glass sheet
Automatic alignment feets
Lengthwise cutting by manual movement of the bridge
Crosscutting with electric engine
Crosscutting with glass edge sensor
Manual fixing of the cutting bridge.
Automatic oiling of cutting heads with manual control
Cutting pressure is centrally adjustable
Manual length adjustment, with length measuring system
Lenghwise cutting head positioning manually
Length and cross breaking bars 1+1
Option:
Basic mounting, + 1 cross breaking bar
Automatic fixing of cutting bridge during cutting process
Movable low-e grinder at the end of the table
|
